Product Description
The El Dorado Santa Maria grill, built to drop into your outdoor kitchen. Same heavy plate-steel firebox, same crank-adjustable grates, no cart. Burn lump, briquettes, wood chunks or splits on a floor of firebrick that soaks up heat and gives it back evenly, and bank the fire to one side for a searing zone and a gentle zone on the same grate.
Spin the cast-iron hand wheel and the chain drive lifts the grates through 15" of travel on sealed bearings, with an auto-stop ratchet that holds wherever you let go. Drop the grate to the coals for steak, raise it to roast a tri-tip or hold chicken while the fire settles. The cantilever arms leave the cooking area open on every side, and the insulated drop-down door in front lets you feed the fire without moving the food. Grease runs to removable stainless trays and ash pulls out through front drawers.
The grates are 12-gauge stainless steel V-channels that catch drippings and carry them away from the flame, so you get less flare-up and cleaner smoke on the food. The firebox is 10-gauge steel lined with 9" of firebrick, wrapped in a 12-gauge outer shell with a 3" air gap on each side, so the outside stays cooler and the inside holds heat. Everything wears a 1,200°F powder coat with stainless hardware, and a lower valance panel finishes the front below the counter. Add the Brasero wood-burning basket or the rotisserie kit when you’re ready. Send us your island layout and we’ll confirm the fit.
Key Features
- Built-in Santa Maria live-fire grill for lump, briquettes, wood chunks or splits
- Firebrick floor spreads heat evenly and lets you run multiple heat zones
- Cast-iron hand wheel with chain drive and auto-stop ratchet, 15" of grate travel
- Sealed bearings on the adjustment shaft
- Cantilever arms keep all four sides of the grate open
- 12-gauge stainless steel V-Groove grates channel drippings away from the flame
- Insulated drop-down front door for tending the fire
- Removable stainless steel grease trays and front ash drawers
- 10-gauge firebox inside a 12-gauge shell with a 3" air gap
- 9" deep firebrick-lined firebox
- 1,200°F powder coat with stainless steel hardware
- Lower valance panel for a finished front
- Works with the El Dorado Brasero and rotisserie kit
Dimensions